Franklin Thalia, Руководство пользователя, Страница: 10 / 13

Page 6 Addendum for Franklin Manual: Thalia Model Page 7 Addendum for Franklin Manual: Thalia Model
• Red and green LED should be
fixed
4.
Repeat step #3 to confirm new code
•
Green LED light will be fixed
Regular Use of Outdoor Keypad
1. Press [ON]
2. Enter in passcode
•
Press [OK]
•
Green LED light will be fixed
3. Doors will open
Outdoor Keypad Reset
1. Remove batteries from the keypad
2. Remove the jumper from one leg as
shown in picture and insert jumper
grabbing both legs
3. Insert batteries and wait for unit to stop
beeping and flashing
4. Once this stops remove the batteries
5.
Remove the jumper off both legs and
reinsert onto one leg
6. Insert batteries and start over with
instructions
Wi-Fi Hub
The Wi-Fi hub allows your Franklin
Autoswing to connect to Wi-Fi so that
way you can operate the openers with an app
on your smart phone. Before you proceed you
must have the following:
•
Wi-Fi Hub accessory
• Thalia model Franklin (it will say Thalia
in the control box or it has grey control
unit housing instead of black)
•
Have strong Wi-Fi connection where
the control unit is located
• Own a smart phone
Installation Steps
1. With the control board OFF, insert the
Wi-Fi Hub to the appropriate location
on the control board
2. Turn the control board ON
3. Download the “U-Control” app from
your app store
4.
Start up the “U-Control” app
5.
Click on “Register” and enter in your
details
•
Once your email address and
password are entered click
“Register”
•
If you have already registered
then you will select “Access”
and continue
6. Open your Wi-Fi connections on your
phone
7. Connect to the Wi-Fi signal of your Wi-
Fi Hub which is identified as BeBA-WI-
FI_00xxxxxxxxxx
8.
Enter in the password “BEBAWIFI”
9.
Click connect
10. Return to the App
• Click on “Proceed”