5
Electrical Kit Z069E for 220VAC Applications
Part
Quantity
Explosion Proof Junction Box
1
Capped 90° Elbow
1
1/2" Union
1
Potted Conduit Nipple
1
1/2" x 3/4" Reducing Bushing
1
3/4" Coupling
1
3/4" Close Nipple
1
Electrical Wire Nuts
12
Scotchlok
™
Wire Connectors
18
Figure 4: Electrical Parts
Preparation
Parts List
This section illustrates the basic components needed
to retrofit a VP1000-220-IC Vacuum Pump into any
new, replaced, retrofitted, or reconditioned dispenser.
This system can be installed in any “Non-Vapor
or Vapor Ready” dispenser including dispensers
with existing “Balance” or “VacAssist” piping. Three
items are required for complete retrofit installations:
VP1000-220-IC, Vapor kit, and Electrical kit. Other
supplies beyond these items may also be needed to
complete your installation (i.e. electrical nipples and,
possibly, additional vapor connections).
Assorted lengths of “UL Listed” electrical nipples as
well as pipe or electrical elbows and couplings will be
required to complete vacuum pump installation.
Mounting Bracket & Hardware
VP1000-220-IC Vacuum Pump
1/2" Conduit
supplied by the
Installing Contractor
Electrical Conduit
Connection to the
VP1000-220-IC
Vacuum Pump
Figure 5: Universal Electrical Kit Z069E
Figure 3: VP1000-220-IC Mounting Parts
