17
FRÄNKISCHE | IM MM SediPoint
5. Cleaning
Please note
When re-inserting the sediment collector,
the lock pins of the shaft bottom must snap
into the recesses of the collector base.
5.3 Special case – removing the sediment collector
5.4 Optional connection set
5.5 Special case – light liquid spills
It is normally not necessary to remove
the sediment collector when cleaning
SediPoint. If, in exceptional cases, above
ground inspection or cleaning is
required, the sediment collector can be
removed using a winch or tripod.
When using the optional connection set,
you can determine the degree of pollution
of the inlet through the open cover. The
drop structure empties when the flushing
water is drained from the shaft, which
allows for pollution to be removed by
high-pressure cleaning and simultaneous
removal.
After light liquid spills, have the system
and, if required, the connection set
emptied and cleaned by a professional
provider. Washed matter must be
disposed of appropriately.
Make sure that the bail snaps into the
shaft wall before the system is re-filled
to avoid uplift.
