Franke SGP 62 M /F Series, Инструкция по установке и эксплуатации

Страница: 8 / 132

SGP 62 M _/F / SMP 62 M _/F / SMP 66 M _/F
– 8 –
EN
Models SGP, SMP
(Fig. 5a)
X X
Fit the appliance in the compartment; fix the
oven to the cabinet with the 4 screws and the 4
bushings provided, using the holes prepared in
the side panels (Fig. 5a).
Note:
(Fig. 5b)
If the oven is to be fitted under a cooktop, firstly turn
the top connection (R) to the right or left so that the
oven fits properly (Fig. 5b).
Electrical connection
Franke ovens are supplied with a three-pole power
cable with free terminals. If the oven is permanently
connected to the power supply, install a device that
ensures disconnection from the power supply, with
a contact opening distance (at least 3 mm) enabling
complete disconnection in category III overvoltage
conditions.
Make sure:
9
The plug and socket are suitable for a 16 A current.
9
Both can be easily reached and are positioned so
that no live part is accessible when inserting or
removing the plug.
9
The plug can be easily inserted.
9
The oven does not rest against the plug when
installed in the cabinet.
9
The terminals of two appliances are not
connected to the same plug.
9
A 3 x 1.5 mm² cable type H05VV-F is used when
replacing the power cable.
9
Make sure you observe the polarities of the free
terminals.
L N
BLU
BLUE
GIALO-VERDE
YELLOW-GREEN
MARRONE
BROWN
Brown = Live
Blue = Neutral
Yellow/Green = Earth
Note:
Make sure the characteristics of the household
electrical system (voltage, maximum power
and current) are compatible with those of your
Franke oven.
The mains frequency is established at switching on.
OPERATION
This oven combines the advantages of “static”
natural convection ovens with those of modern “fan”
ovens. It is a very versatile appliance which enables
safe and easy selection of 6 different cooking
methods. Use knobs (A) and (D) on the control panel
to select the required programmes and temperature.
For best use of your Franke oven, consult the
cooking table on page 12.
Cooling fan
In order to reduce the temperature at the door,
control panel and sides, the Franke oven is equipped
with a cooling fan which is automatically activated
when the oven is hot. When the fan is on, air blows
from the front of the oven between the front panel
and oven door; special attention has paid to ensure
that the exiting air does not disturb the kitchen
environment and that noise is kept to a minimum.
To protect kitchen units, the fan keeps running
after cooking until the oven has cooled down
sufficiently.
Oven light
This symbol corresponds to switching on of the
oven light without activation of any type of heating.
This option is useful for cleaning the oven when it is
switched off, to see the cooking compartment.
Defrosting
To defrost the food, the following procedure is
recommended:
X X
Set the programme selector knob (A) to the
position „TURBO GRILL COOKING“.
X X
Set the thermostat knob (D) to 0°C.
X X
Set the cooking timer knob (B) to manual mode .