Franke SGP 62 M /F Series, Инструкция по установке и эксплуатации

Страница: 14 / 132

SGP 62 M _/F / SMP 62 M _/F / SMP 66 M _/F
– 14 –
EN
Replacing the oven lamp
A
Franke ovens are equipped with
a circular lamp positioned in the
top left area at the back of the
compartment. To replace the
oven lamp, proceed as follows:
X X
Turn off the power to the appliance by means of
the omnipolar switch used for connecting it to
the electrical system, or disconnect the plug if
accessible.
X X
Unscrew the glass cover (A).
X X
Unscrew the lamp and replace it with one
resistant to high temperatures (300 °C),
with the following characteristics:
– Voltage: 220/240 V ~ 50-60 Hz
– Power: 25 W
– Connection: G9
X X
Refit the glass cover (A) and reconnect
the power supply.
TECHNICAL DATA
Power supply voltage and frequency 220-240 V, 50/60 Hz
Total power and fuse rating 2300 W ~ 16 A
Power and heating elements
Upper 1000 W
Lower 1250 W
Grill 2250 W
Fan 30 W
Tangential fan 15 W
Oven lamp 1 x 25 W
SUPPORT
In the event of any operation problems, contact
a Franke Technical Service Centre (refer to the
attached list).
Never use the services of unauthorised
technicians.
Specify:
– the type of fault;
– the appliance model (Art./Cod.);
– the serial number (S.N.).
This information is given on
the appliance dataplate on the
warranty certificate.