2
ON
OFF
HOT
COLD
The Franke Omni System must be installed using only the
genuine Franke items listed below. Substituting any of the
above 3 items for non-Franke manufactured alternatives, or
failing to install and maintain the unit in strict accordance with
these instructions, will invalidate your product warranty.
Franke will not accept liability for damage or accidents
resulting from the use of non-genuine Franke components,
incorrect installation or operation.
Application
This product is a boiling water device intended for domestic
use only. The water supply pressure must be between
minimum 1.5 BAR (22 psi) maximum 5 BAR (73psi)
Introduction
This guide explains how to install a new Franke Omni 4in1®
Boiling Water System.
Thank you for purchasing a Franke Omni Tap System. In
keeping with Franke’s worldwide reputation this product has
been designed and manufactured to the very highest quality
standards. Correctly installed and properly maintained in
accordance with the following instructions, it will provide you
with reliable service for many years.
The Franke Omni System comprises 3 separately packaged
assemblies:
1. Franke 4in1 Omni tap (Part Number: 119.0380.520)
2. Franke boiler - Model QHT-1 (Part Number: 119.0380.581)
3. Franke water filter complete with a Franke 08 filter
cartridge. (Part Number: 119.0380.582)
Please Note: This diagram is for guidance only
