Franke 116.0574.897, Инструкция по установке и эксплуатации

Страница: 6 / 140

FMO 45 GN 81 / FMO 45 GN 86
– 6 –
EN
Z Z
It is important to place the wire grill and tray
properly on the wire racks and/or correctly
place the tray on the rack. Place the grill
or tray between two rails and make sure it
is balanced before putting food on it.
Z Z
Against the risk of touching the oven
heater elements, remove excess parts
of the baking paper that hang over from
the accessory or container.
Z Z
Never use it at higher oven temperatures
than the maximum usage temperature
indicated on your baking paper. Do not
place the baking paper on the base
of the oven. Against the risk of touching
the oven heater elements, remove excess
parts of the baking paper that hang over
from the accessory or container.
Z Z
When the door is open, do not place
any heavy object on the door or allow
children to sit on it. You may cause
the oven to overturn or the door hinges
to be damaged.
Z Z The packaging materials are dangerous for
children. Keep packaging materials away
from the reach of children.
Z Z
User should not handle the oven by himself.
Z Z During usage, the internal and external
surfaces of the oven get hot. As you open
the oven door, step back to avoid the hot
vapour coming out from the interior. There
is risk of burning.
Z Z
Do not place heavy objects when oven door
is open, risk of toppling.
Z Z
Oven supply can be disconnected during any
construction work at home. After completing
the work, re-connecting the oven shall
be done by authorized service.
Z Z
User should not dislocate the resistance
during cleaning. It may cause an electric
shock.
Z Z
Turn off the appliance before removing
the safeguards. After cleaning, install
the safeguards according to instructions.
Z Z
Cable fixing point shall be protected.
Z Z
Please don’t cook the food directly on
the tray / grid. Please put the food into
or on appropriate tools before putting them
in the oven.
Electrical Safety
Z Z
Plug the appliance in a grounded
socket protected by a fuse conforming
to the values specified in the technical
specifications chart.
Z Z
Have an authorized electrician set grounding
equipment. Our company shall not
be responsible for the damages that shall
be incurred due to using the product without
grounding according to local regulations.
Z Z
The circuit breaker switches of the oven
shall be placed so that end user can reach
them when the oven is installed.
Z Z
The power supply cord (the cord with
plug) shall not contact the hot parts
of the appliance.
Z Z
If the power supply cord (the cord with plug)
is damaged, this cord shall be replaced
by the manufacturer or its service agent
or an equally qualified personnel to prevent
a hazardous situation.
Z Z
Never wash the appliance by spraying
or pouring water on it. There is a risk
of electrocution.
Z Z
Do not use cut or damaged cords or extension
cords other than the original cord.
Z Z
Make sure that there is no liquid or humidity
in the outlet where the product plug
is installed.
Z Z
The rear surface of the oven also heats
up when the oven is operated. Electrical
connections shall not touch the rear
surface, otherwise the connections
may be damaged.
Z Z
Do not tighten the connecting cables
to the oven door and do not run them over
hot surfaces. if the cord melts, this may
cause the oven to short circuit
and even a fire.
Z Z Unplug the unit during installation,
maintenance, cleaning and repair.
Z Z
If the power supply cable is damaged,
it must be replaced by its manufacturer
or authorized technical service or any
other personnel qualified at the same level,
in order to avoid any dangerous situation.
Z Z
Make sure the plug is inserted firmly into
wall socket to avoid sparks.
Z Z
Do not use steam cleaners for cleaning
the appliance, otherwise electric shock
may occur.
Z Z An omnipolar switch capable to disconnect
power supply is required for installation.
Disconnection from power supply shall
be provided with a switch or an integrated
fuse installed on fixed power supply
according to building code.