a
b
120
220
ISO M PRINT M
EXP.NO.
88:88. ‘88
-
+
mode
.
26
As the batteries are loaded, all segments of
the LC display should light up simultaneously
for about one second. Should this check fail to
appear, briefly push battery spring
a
away from
the batteries and let go.
Insert film magazine and close magazine until it
clicks into place. Push gripper ridge up to open
the drawslide.
After changing batteries, the memory will be
returned to its default setting (see page 21),
and the film speed has to be entered again (see
page 23).
Make other settings as required.
Changing batteries
The batteries are exhausted when the LC dis-
play is hardly legible.
Push gripper ridge all the way in the direction
of the arrow “magazine change/turn”. Press
the two lateral releases and open the magazine.
Remove the film insert.
Push battery spring
a
away from the batteries
and remove exhausted button cells from battery
compartment
b
. Dispose of exhausted batteries
with due regard for the environment. Insert two
new 1.55V button cells observing their polarity
- +.
FILM MAGAZINE
