3.2. Instructions for use with wood
3.2.1. Lighting (figure 7)
•
Slide the secondary air inlet (# B1) to the right. Open
the primary air inlet (# C1).
•
Lay firelighters or rolled up newspapers on the grate
with a reasonable quantity, if necessary, of dry kindling
wood. Place 2 or 3 small logs on top.
•
Light the newspaper or firelighters using a long taper
and close the door.
•
When the stove body is very hot, close the lower spin
wheel.
•
The burning rate can now be lowered by moving the
top air control to the left.
The airwash system works with the top airslide. When
the top airslide is full open the system works at its
strongest efficiency.
The more closed down the airslide is, the less effective
the airwash will be ( when shut down completely, the
airwash system can not function )
3.2.2. Re-fuelling (figure 7)
•
Open the glass door and add logs.
•
Leave the lower spin wheel open for a few minutes to
allow the initial volatiles in the wood to burn.
•
Close the lower spin wheel.
3.3. Instructions for use with solid fuel
3.3.1. lighting (figure 7)
•
Slide the secondary air inlet (# B1) to the right. Open
the primary air inlet (# C1).
•
Lay firelighters or rolled up newspapers on the grate
with a reasonable quantity, if necessary, of dry kindling
wood. Place a small quantity of solid fuel on top.
•
Light the newspaper or firelighters using a long taper
and close the door.
•
When the fire is burning fiercely, add further fuel.
•
When the stove body is hot, close the top air control by
sliding to the left.
•
The burning rate can now be adjusted by rotating the
lower spin wheel.
The airwash system works with the top airslide. When
the top airslide is full open the system works at its
strongest efficiency.
The more closed down the airslide is, the less effective
the airwash will be ( when shut down completely, the
airwash system can not function )
3.3.2. Re-fuelling
-
Open the lower spin wheel.
-
Open the glass door and add fuel.
-
Leave the lower spin wheel open for a few minutes to
allow the initial volatiles in the fuel to burn.
-
Adjust the lower spin wheel to the desired position.
8
Technical manual “1171”
“MONTFORT” - ref. 134 05 01
Instructions for user
Figure 8 - Removing the fuel retainer
Figure 9 - Mounting the oscillating grate and the ash
tray
•
The nominal output is obtained with an opening of the
primary air inlet closed and secondary air inlet of 50 %
open.
