6 - Operating Instructions
This equipment is designed for use out of doors, in free air. Never place anything on, or cover, the
searchlight when in use as this may present a hazard.
The beam of the searchlight can be adjusted to give a variety of beam types. Using the lampholder
focus wheel, the desired beam can be achieved for any particular application.
Using the template provided mark out and drill the fixing holes through the deck or cabin roof. In
case of cabin control models, a centre hole is also required to allow the mechanism to pass
through.
When bolting down the searchlight on an uneven surface, it is necessary to use a suitable sealant,
such as silicone, in order to ensure weather-proofed joint.
This product should not be used for any purpose other than for which it was designed. Any
modifications to the product should not be undertaken without consulting the manufacturer.
