Installation Guideline
A typical installation and connection routine for the searchlight is as follows:
Standard Models
Referring to wiring diagram C24064, a supply is fed into the Control Gear which in turn provides
the relevant supply to the searchlight head.
Cables to be connected by the customer: Mains cable into the Control Gear Enclosure (customer
to supply);
3 cores 1.5mm
from Control Gear Enclosure into Searchlight Head (3 metres supplied
–
the
customer must provide a suitable junction box if these cables are to be extended).
All internal wiring in the Control Gear Enclosure and Searchlight head is supplied pre-wired.
When operational, the output from the control gear should be approximately 100 volts at 13.8
amps.
