D435_Manual_V1.0
9
3.5.
Labels on the Camera
The label on the sticker of the camera indicates two numbers:
PC = Product Code
With this number you can purchase the exact same product at
FRAMOS.
SN = Serial Number
This is the unique identifier of a single camera. For support and
RMA cases, this number is necessary.
3.6.
Thermal Control
The camera has thermal sensors implemented that prevent the camera from taking damage
by overheating. The temperature is mainly regulated by the measured housing temperature.
Once it exceeds 60°C, the intensity of the projector is reduced and eventually it will be switched
OFF.
Most of the heat is conducted to the rear plate of the camera. Therefore, heat conductive
material for mounting the camera is recommended.
3.7.
Mechanical Dimensions
Front View
Side View
Back View