Framery Q Скачать руководство пользователя страница 3

Страница: 3 / 148

Framery Q (UL) Meeting Maggie

Contents

1 Warranty checklist.......................................................................................7

2 Important safety and product instructions............................................... 8

2.1 Preface....................................................................................................................8

2.2 Product information................................................................................................ 8

2.3 Copyright.................................................................................................................8

2.4 Manual contents..................................................................................................... 8

2.5 Intended use...........................................................................................................8

2.5.1 Non-conventional use.................................................................................9

2.5.2 Ambient conditions for use.........................................................................9

2.6 Warning, information, and safety symbols in this manual...................................... 9

2.7 Main safety risks related to the installation, maintenance, disassembly, and

use of the product.................................................................................................. 10

2.7.1 Installation, maintenance, and disassembly.............................................10

2.7.2 Electrical safety........................................................................................ 10

2.7.3 Fire safety.................................................................................................11

2.7.4 Use............................................................................................................12

2.8 Moving the product on casters (optional).............................................................13

2.9 Location of Product Markings...............................................................................14

3 Installation requirements.......................................................................... 17

3.1 Tools and accessories..........................................................................................17

3.2 Main dimensions...................................................................................................18

3.3 Installation space..................................................................................................18

3.4 Operating space................................................................................................... 19

3.5 Seismic anchoring requirements.......................................................................... 20

4 Floor............................................................................................................ 21

4.1 Install the casters (optional)................................................................................. 21

4.2 Prepare the acoustic panel.................................................................................. 22

4.3 Connect the floor modules................................................................................... 23

4.4 Level the floor.......................................................................................................28

5 Install the wall modules............................................................................30

5.1 Remove the wall cover panels.............................................................................30

5.2 Connect the wall modules to the floor................................................................. 31

6 Roof.............................................................................................................34

6.1 Connect the roof modules....................................................................................34

6.2 Install the roof.......................................................................................................37

7 Front frames and glasses.........................................................................40

7.1 Install the side frames (front)............................................................................... 40

Содержание Q





















































































































































Результаты поиска

Содержание Q

Отзывы:

Framery Q, Руководство по установке, Страница: 3 / 148

Результаты поиска

Содержание Q

Отзывы: