Frama Matrix F12
24
4.4. Franking
It is only possible to frank mail items when the Ready prompt (letter icon) is showing in the display (see
page 10).
4.4.1. Inserting and franking the letter
You can now frank your mail item with the selected postage
rate. To do this, place your mail item in your Frama Matrix F12
franking system so that the right-hand edge is flush against the
housing and push the mail item back to the stop.
The letter will be franked and ejected to the left.
4.4.2. Franking labels
Use only original Frama Matrix F12 franking labels. Frank labels in the normal way, just like a letter. Frama
Matrix F12 franking labels can be used twice. Turn the label through 180 degrees and frank it again.
To remove the adhesive label, bend the label at the perforation and peel off the backing paper.
Danger
1.
Use accessories intended for this system only. The use of accessories that are not approved, or
not authorised, can be detrimental to the service life of the franking system. At the same time,
a danger to the operator can be created.
2.
Always keep your fingers and other parts of the body, ties, necklaces, scarves, open sleeves
and similar loose items away from the feed entry area and the feed rollers. There is a risk of
injury on rotating parts.
3.
Do not clean the system with flammable fluids. There is a risk of explosion.
4.
Disconnect the system from the mains before cleaning it. Clean the system with a damp cloth
only. Do not spray any liquids on or into the franking system. There is a risk of electric shock.
Lethal hazard.
5.
Do not place any liquids, glasses, franking ink, etc. on the franking system.