EASY TO OPERATE AND TO EASY TO MOVE AROUND
- The unit can be moved easily on rollers from room to room.
- The air quantity can be adjusted via up to three ventilation levels.
- The cold air flow can be very strong and reach up to 6 meters.
- Installation by a specialist is not required.
- Simply plug into a normal household socket with an operating voltage of 220-240V/ 50Hz.
- The extract air hose can be stored in the unit for transport and when not in use.
- This unit operates in accordance with the heat pump principle. On account of the special, innovative.
construction of the unit, its heating function is extremely efficient compared to conventional heating
units.
- Do not connect the hot air hose to the ventilation ducts. It may result in damage not covered by
warranty protection. Free flow of hot air from hot air hose to the environment should be provided.
SCOPE OF DELIVERY:
1 x unit
1 x remote control
1 x air hose 150 cm
1 x air hose 300 cm
1 x Air hose connector
1 x Large flattened hose end
1 x Air hose connection piece
2 x Installation hose bracket
1 x filtr dolny
1 x filtr bottom
1 x operating instruction
1 x drainage hose 50 cm
2 x sealing plug
CAUTION!: INSTALLATION BRACKETS EXTEND VERTICALLY
UPWARDS AS SHOWN BELOW
BEFORE INITIATION:
1. To avoid damage, place the unit in an upright position for at least 2 hours
before initiation. Cooling agent must stabilize.
2. Pull out the bracket air hose and remove the hot air hose 1.5 m.
3. Stretch the air hose as shown in the picture.
4. Attach the hose in the bracket by screwing as shown in the picture.
5. Install the bracket with the air hose in the air conditioner.
THE BRACKETS ARE REMOVED FROM THE UNIT BY PULLING VERTICALLY TO THE TOP AND INSTALLED BY
SLIDING VERTICALLY DOWN. DIFFERNT WAY OF REMOVING/INSERTION WILL BREAK FASTENERS IN THE
UNIT.
16
www.uni-lux.eu
6. Stretch the cold air hose 3.0 m (located in a separate box) and pull
up the second frame.
7. Install the air hose in the second frame by screwing as shown in the
picture (arrow No.2) and install the frame in the air conditioner.
8. Plug the power plug into a socket. Never pull the plug out of the socket with force using the connection line. This can
damage the power cable.
9. Since the unit emits hot air, please observe a sufficient minimum safety distance to each wall.
UK
