HEATING
On cold days it is recommendable to start the unit early in order to avoid intensive cooling of the room.
For the heating function and to improve the heating effect and avoid lower temperatures (lower than 17°C)
we recommend you remove the rubber plug from the condensation water outlet and allow the condensation water
to leak out of the unit using the drainage hose. However, the drainage hose does not have to be connected in the
heating mode. Please make sure that the condesation water outlet is closed with the rubber cap during operation. In
such a case, proceed analogously to the emptying of the water tank in the cooling function.
The heating function of the unit must not be operated at a room temperature of more than 23°C or less than 7°C.
23
www.uni-lux.eu
The cold extract air has to be fed out of the room via the air hose. This can be executed e.g. via a tilted window, a
door or wall aperture. Make sure that no warm outside air can enter the room. For effective heating, we recommend
our selection of various accessories which reduce or prevent entry of cold air into the room. Set the function to
“Heating”. The settable temperature range is between 15 and 25 degrees target temperature. You can set this using
the temperature control.
[TEMP+]
i
[TEMP-].
Warning:
Both during cooling and heating the unit can be configured when located outside the room to be
cooled/heated.
UK
