FSW63-14 Multilanguage 01/03/2016
34
FSW 63
ELECTRIC BOX
The electric switch board is made according to electromagnetic compatibility norms (2004/108 CEE)
and Electrical Safety Rules for the Low Tension Appliances 2006/95 CEE.
Inside the electric box there are the following components:
1.
Terminals for remote control;
2.
Electronic board;
The installation must provide a general switch if necessary, according with local laws and norms.
MICROPROCESSORS
The microprocessors check all the function of the machine like: General functioning, automatic
defrost system, alarms and set point of the humidty and temperature (temperature only for machine
with hot water coil Version).
Accessories
Body machine completely in Inox
Electric heaters in inox 2,0 kW 230/1/50 (E.H):
Armored electric heaters in inox, it is able to transfer the 90% of the convective heat in way evenly.
Hot water coil (H.W.C) nominal capacity 2,4 kW:
This battery can help you in heat the environment of the swimming pool thanks its efficient water hot
coil due to the narrow step fins. It is possible to assure a nominal capacity of 2,4 kW with a
environmental temperature of 27°C and an inlet water temperature between 60 and 70°C.
3 Way electric valve ON/OFF (E.W):
Control of the flow water inside the hot water coil
Remote control (humidostat) (On/Off):
It is possibile to use a remote control with the machine. In this case must be used a remote
humidostat to be connected to the terminal boxes of the electric panelboard in place of the
standard humidostat. It is also possible to have an ON-OFF switch to be electrically connected in
series to the humidostat.
Autorestart
(On/Off):
If is ON State network fails or machine is unplugged, the values of set point, delay counter, defrost
counter, hour counter and any other operating parameters are stored and, when power comes back,
everything continues as before.
H.D.G. defrost
This machine allows to realize the hot gas defrost.