FPS PowerSewer V4PS, Инструкция по установке, эксплуатации и обслуживанию

Страница: 3 / 32

Safety Instructions 2
System Diagram 4
1 Introduction 5
1.1 Product Description
1.2 Installation and Maintenance Tool List
1.3 Shipping Configuration
1.4 Transportation and Handling
1.5 Storage
2 Pre-Installation 7
2.1 PowerSewer® Inspection
2.2 Verify Site Readiness
2.3 General Installation Steps
3 Installing Collection Tank 8
3.1 Excavating for Collection Tank
3.2 Excavation Location
3.3 Excavation Depth
3.4 Bedding Material
3.5 Setting the Collection Tank
3.6 Positioning the Collection Tank
3.7 Ballasting Collection Tank with Concrete
4 Solvent Cementing Joints 9
4.1 Preparing Joints
4.2 Pre-Connection Inspection
4.3 Applying Primer
4.4 Applying Solvent Cement
4.5 Joining Pipe and Fittings
4.6 Cleaning Joint
4.7 Joint Curing
5 Installing Drop Inlet Pipe 10
5.1 Preparing Drop Inlet Pipe
5.2 Assembling Drop Inlet Pipe
5.3 Solvent Cementing Drop Inlet Pipe Assembly
6 Installing Flexible Discharge Pipe Connector 10
7 Installing the Vent 11
7.1 Vent Coupling Location
7.2 Vent Cap Location
7.3 Vent Pipe Slope
7.4 Solvent Cementing Vent Piping and Fittings
7.5 Installing the Remote Vent Cap
8 Locating and Mounting the Control Panel 11
8.1 Selecting the Control Panel Location
8.2 Mounting Fasteners
8.3 Securing the Control Panel
9 Making Electrical Connections 12
9.1 Cable Specifications
9.2 PowerSewer® Pump Power to Control Panel
9.3 Control Panel Float Connections
10 Backfilling Around Collection Tank 13
10.1 Approved Backfill Materials
10.2 Flowable Fills
10.3 Placement and Compaction
10.4 Finished Grade
11 Starting Up the System 14
11.1 Pre-Startup Checklist
11.2 Flush System
11.3 Installing Grinder Pump
11.4 Open Discharge Valve
11.5 Turn On Power
11.6 Fill Collection Tank
11.7 Turn Grinder Pump On
11.8 Troubleshooting
11.9 Secure the System
11.10 Review System with Property Owner
12 Operation 15
12.1 Automatic Operation
12.2 Manual Operation
12.3 High-Level Alarm
12.4 System Care
13 Maintenance 16
13.1 Safety Instructions
13.2 Installation and Maintenance Tool List
13.3 Inspections
Technical Drawings 17
Limited Warranty 29
TABLE OF CONTENTS