FPG Visair IN-VH06, Руководство по эксплуатации продукта

Страница: 19 / 40

IN-VH06, VH09, VH12, VH18 and VH24
- 19 - © Future Products Group
Dixell Controller
VISAIR CABINETS - SERVICING
Temperature
Regulator
XR20CX
Model XR20CX is a microprocessor based
controller.
In this application it is configured as a
heating controller, and unwanted functions
are disabled.
XR20CX Key
Functions
KEY FUNCTION
To display target set point; in programming mode it selects
a parameter or confirm an operation
(UP): To see the max. stored temperature; in
programming mode it browses the parameter codes or
increases the displayed value
(DOWN): To see the min stored temperature; in
programming mode it browses the parameter codes or
decreases the displayed value
To switch the instrument off, if onF = oFF. Not enabled
XR20CX
Display the Set-
point
To show the set-point value, press and immediately release the SET key.
Press and immediately release the SET key or wait for 5 seconds to display the
probe temperature again.
XR20CX
Change the
Set-point
To change the set-point value, press the SET key for more than 2 seconds;
The value of the set-point will be displayed and the °C or °F LED starts blinking;
To change the set value push the or arrows within 10s.
To memorise the new set-point value push the SET key again or wait 10s.
XR20CX
Connections