FP PostBase, Руководство оператора

Страница: 21 / 204

The basics of operation 21
3.6 Sealing function
(optional)
When equipped with the optional components sealer and power sealer,
PostBase One can frank and seal your mail in a single run. Coming from the feeder,
the mail pieces pass through the sealer. In the sealer, the sealing flap of the envelope
is moistened by a sponge. The flap is then closed and sealed as it passes through
the system. After franking, the mail piece is ultimately closed by the power sealer.
You can use the sealing function for letters with a thickness of up to 7 mm. The enve-
lopes must be suitable for machine sealing (see page 182). Also, please mind enve-
lope quality.
Please note that we can assure reliable sealing results only when you use Francotyp-
Postalia ‘sealit’ sealing liquid.
Sealing
If the letters are to be sealed:
• Turn the envelope sealing switch to the
position SEAL .
PostBase One monitors the level in the seal-
ant tank. You are notified when you have to
top up the sealing liquid.
On how to fill the tank, please refer to
chapter 15.9 on page 123.
If you have not used the sealing function for a
certain amount of time, sealing liquid is auto-
matically pumped into the moistener. Thus,
PostBase One makes sure the sponge is
properly wetted. In the S
EALING
menu, you
can set the optimal moistening level for the
envelopes you use (see chapter 14.15,
page 98).
No sealing
If the letters are not to be sealed (or if they
are already sealed:
• Turn the envelope sealing switch to the
position NON SEAL .