FP PostBase, Руководство оператора

Страница: 153 / 204

Appendix – Moving the PostBase One to another location 153
Moving the PostBase One to another location
Warning! When moving the PostBase One franking system to another loca-
tion, please observe the following tips for your own safety:
• Switch off the franking system and all components connected to it prior to
dismantling and transporting them.
• The PostBase One franking machine weighs around 20 kg. You are
advised to seek the help of another person when moving the franking
machine.
Warning: Mind Your Hands! Be very careful when handling the power
sealer. As a consequence of its construction design, the power sealer has
very sharp edges that might hurt you.
Caution! Please observe the following tips to avoid damage to the
PostBase One franking system:
• Have the PostBase One franking system with dynamic scale moved by FP
aftersales service. Improper moving or transport of the dynamic scale may
result in damage to the scale system.
• Empty the sealant tank completely before transporting the sealer.
• Do not use attached parts like the hand feed tray, the protective glass, or
the label dispenser as ‘handles’ during transport.
The best way to handle the components is to hold them at the lower part
of the housing at the clearance normally used for the housing connectors.
• Always move the franking system in a horizontal position.
• We recommend using the original packaging in case you have to move the
franking system or send it to the FP aftersales service.
• Once you have brought the franking system from a cold environment to the
new location: Wait for at least two hours before starting up the franking
system again. The PostBase One adapts to the room temperature. Any
condensation evaporates.
This chapter describes how to dismantle and install the PostBase One frank-
ing system including all of its optional components. Should a step not apply
to your configuration, just continue with the next step.