FP centormail, Руководство оператора

Страница: 156 / 212

centormail Operator Manual 156
Data (e.g. adverts) cannot
be loaded from chip card The card used does not contain valid data.
Wrong card plugged in?
Insert a data card.
Card is defective. Call your FP servicing dealer.
Data transfer to FP-service
impossible centormail cannot establish a connection to the data
center.
Check the modem parameters
(see Chapter 14.8, page 103)
.
Check the phone number set up for remote diagnostics
(see Chapter 14.9, page 105)
.
Print system flap is
jammed On systems with an ink tank system, the connecting
hoses leading from the tank to the print heads might
push against the flap.
Gently turn the black handles of the connection pieces
on the print head. Thus, you can alter the position of
the hoses.
…
with automatic feeding
Jam On how to fix a letter jam, please see
Chapter 16.2,
page 158 and Chapter 16.3, page 159 .
Letter transport
does not start Sensor does not recognize the letters.
Start letter transport with Start / Stop key.
centormail’s home menu is not displayed.
Press the Home key to enter the home menu, then try
again.
Letter transport is
stopped / batch
processing was
interrupted Jam. Carefully read the displayed information.
On how to fix a letter jam, please see
Chapter 16.2,
page 158
and
Chapter 16.3, page 159
.
The batch counter is turned on. After the pre-set
number of mail pieces have been processed,
centormail will automatically stop.
Disable the batch counter or adjust the target count
(see Chapter 5.2, page 42) .
Problem Possible cause and remedy