FP centormail Скачать руководство пользователя страница 132

Страница: 132 / 212

centormail Operator Manual

132

Connect the hose to the print head:

• Hold the connecting piece on its black

handle and plug onto the print head as
shown.

The hose is correctly connected to the
print head if the connecting piece is fully
within the transparent shaft.

• Connect the hose of the second print

head in the same way.

• Hold the print head with its connectors

facing backwards, i.e. towards the back
of the mailing system.

• Insert the print head into its bracket.

• Push down the print head as far as it

goes.

• Finally push the print head back

gently – it will then tilt into the bracket.

• Insert the second print head in the

same way.

• Lock the print heads: Turn the two blue-

green levers downwards.

Connecting piece

Содержание centormail





















































































































































































































Результаты поиска

Содержание centormail

Отзывы:

Бренды по названию

Популярные бренды

FP centormail, Руководство оператора

Результаты поиска

Содержание centormail

Отзывы:

Бренды по названию

Популярные бренды