Foy HL316, Руководство пользователя и гарантия

Страница: 12 / 20

12
1. HANDLE
2. GUN TRIGGER HOLDER
3. HOSE & HOSE HOLDER
4. WHEELS
5. WATER OUTLET
6. GUN
7. ADJUSTABLE LANCE
8. SOAP DEPOSIT GRADA
TECHNICAL DATA
HL316
VOLTAJE-FRECUENCY
127 V ~ 60 Hz
POWER 1 300 W
POWER CONSUMPTION 10,5 A
MAXIMUM PRESSURE 1 600 psi (11,0 MPa)
NOMINAL OUTPUT PRESSURE 1 000 psi (6,89 MPa)
MAXIMUM INLET FLOW 14 psi - 21,7 psi (100
KPa -150 KPa)
MINIMUM INLET FLOW 7 L/min (0,24 CFM)
OUTPUT FLOW 5,5 L/min (0,19 CFM)
MAXIMUM TEMPERATURE OF
THE WATER 40°C
MAX PRESSURE ON GUN 2320 psi
MAX PRESSURE ON HOSE 2030 psi
HOSE 3 m
POWER CABLE 5 m
CONDUCTOR 16 AWG
PROTECTION IPX5
OVERALL SIZE (23 x 23 x 56) cm
WORK CYCLE 30 min x 20 min
WORK HOURS PER DAY 3 hr
WEIGHT 5,7kg (12,6 lb)
UNPACKING
Take out the product from the package and
verify that all the elements listed as its content
are present, do not throw away the packaging
before checking that nothing is missing. The
elements used for packaging may be easily re-
cycled.
ASSEMBLY
1. Place the hose and gun holder accessories on
both sides of the piece of equipment.
2. Assemble the lance to the gun.
3. Join the high- pressure hose to the gun using
a 17 mm or adjustable wrench not included with
your washer.
4. Insert the other end of the pressure hose
into the water outlet on the front of the
piece of equipment
INITIAL SETTINGS AND ADJUSTMENTS
• Connect your pressure washer to the water
supply network from home, remember that you
must have a minimum pressure of 15 psi and
flow rate of 6 l/min using a garden hose not
included with the team of not more than 10
meters long.
Install a not included filter in the household
water outlet to remove dirt particles that water
may contain.
• Check that the power supply is suitable for the
washer, if you have any doubts consult a special-
ist or call your URREA Service Center.
NOTE: For using extension cords refer to the con-
ductors table at the beginning of this manual.
Water filter Hose connector
1
7
2
4
5
3
6