Foy BP305, Руководство пользователя и гарантия

Страница: 11 / 18

11
E N G L I S H •
User’s manual
tection. Dust mask, nonskid safety shoes, hard
hat, or hearing protection must be used for ap-
propriate conditions.
Before connecting the tool to a power source
(receptacle, outlet, etc.) be sure that the volt-
age supplied is the same as that one specified
on the nameplate of the tool. To use a not
specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on
or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
SERVICE
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
WATER PUMPS
· This pump is designed for pumping clean
neutral liquids, at temperatures not exceeding
35° C. Useful for irrigation of orchards and to
increase insufficient pressure of the water sup-
ply network.
WARNING: The water pump must not be
used when people or animals are in the water
· It must not be used for the drinking water
supply or for the delivery of foodstuffs.
· Explosive, flammable, aggressive or health-
hazardous substances and faecal matter must
not be pumped.
· This product must not be exposed to dripping
or splashing liquids.
· The appliance is not suitable for continuous
running (e.g. permanent circulation in filter
systems).
· It is also not suitable for use with liquids
containing abrasive materials (e.g. sand) or
containing mixtures of dirt, sand, mud or clay.
· Any other use is considered improper. Un-
predictable damage can occur as a result of
improper use, modifications to the appliance
or due to the use of parts which have not been
tested and approved by the manufacturer.
· The connection must be made to earthed
sockets which have been properly installed,
earthed and tested. Mains voltage and fuse
must comply with the technical data.
· Do not kink, crush, drag or drive over the
mains cable; protect against sharp edges, oil
and heat.
· During operation for swimming pools, garden
ponds and similar places, the appliance must
be equipped with a residual current circuit
breaker (RCCB) with a design fault current of
not more than 30 mA.