OSD - Menu
The receiver generates OSD-Menu (On-Screen Display).
This is used for adding/removing devices and presen ng the link status and technical
informa on.
OSD - Setup window
In order to open the Setup window use the remote control at the receiver and
Press the “
Menu
” Hotkey bu on.
The Setup window contains:
Add new source
,
Remove source
,
Modify
name
source
and
Status
menus
for technical informa on.
Adding new video Source
To add a new Video Source,
see Registering a transmi er to a single receiver
sec on.
Removing video Sources
To remove a source,
see the Unregistering transmi er
sec on.
Modify video source name
In order to modify the source name, follow the instruc ons below:
1.
In order to modify the transmi er name press the “MENU” bu on to open the
OSD menu.
2.
Choose the “Modify Video Source Name” op on using the up and down arrows.
3.
Press the “OK” bu on.
