11.
Wait l the registra on process is completed. OSD message of "
Adding
[
Tx
name
]
…
"and progress bar will be shown during the process.
12.
In order to add add onal receiver to the transmi er, Power downs all other
receivers, except the latest one.
13.
Repeat steps 5 through 12 for each receiver.
14.
When all the receivers have been registered to the transmi er power on all the
receivers one by one.
15.
The video should be displayed on all monitors.
*The registration process can be done without HD source, an OSD message will appear to
notify of missing video source.
Registering mul ple transmi ers to a receiver
To register between add onal transmi er to a receiver:
1.
Connect the HD Source to the transmi er*.
2.
Connect a HDMI cable from the receiver to the HD display.
3.
Power on the transmi er and receiver.
4.
Use the remote control at the receiver and Press the “
Add
” Hotkey bu on.
5.
The message “
” will appear on
the monitor.
6.
Press the registra on bu on on the transmi er un the “
Network
” LED starts
blinking.
7.
Wait for OSD message of "
Adding
[
Tx name
]
Press OK to
".
8.
Press the “
OK
” bu on on the Remote control to con
fi
rm the new transmi er.
9.
Wait un the registra on process is complete. OSD message of "
Adding
[
Tx
name
]
…
"and progress bar will be shown during the process.
10.
Video link is established.
*The registration process can be done without HD source, an OSD message will appear to
notify of missing video source.
