40
Changing the Radio Channel:
1.
Access the TX1000 Settings menu and select “Radio Channel”
2.
Cycle through the available channels using the scroll buttons.
3.
When the proper channel is set, push the “Play/Select” button to lock it in.
IMPORTANT NOTE
Do not change the radio channel on the remote control without also changing it on the X2S.
Doing this will result in a loss of communication. To change the channel on the X2S, please
see Section 3.
9-2
Download List
Any time you reprogram the X2S digital game call to add new sounds or new FOXCAST sequence
files, you must download a new copy of the play list to the X2S remote. This menu item will
guide you through that process. The entire programming process is covered in more detail later
in the manual.
9-3
AUX
The auxiliary jack operation specifications can be changed for either momentary or latched. All
FOXPRO Jack Predator Decoys require that the jack be setup for momentary.
Configuring the Auxiliary Setting:
1.
Access the TX1000 Settings menu and select “AUX”.
2.
Cycle through the two options using the scroll buttons.
3.
When the appropriate setting is selected, push the “Play/Select” button to lock it in.
IMPORTANT NOTE
Some third party decoys may require latched operation as opposed to momentary. A
detailed list of other products and their specific requirements is not maintained by FOXPRO.
You will need to check with the equipment manufacturer to determine if it is compatible and
what the requirements are.
9-4
View
The X2S remote control can display your sounds either by general listing or by category listing.
Sound categories are the best route to go if you have a large number of sounds.
Configuring Sounds View:
1.
Access the TX1000 Settings menu and select “View”.
2.
Cycle through the two options using the scroll buttons.
3.
When the appropriate setting is selected, push the “Play/Select” button to lock it in.
Содержание X2S Series
Страница 1: ......
Страница 59: ...59 Notes...
