29
This feature can be useful in areas that you frequently call for predators. If a particular sound
has netted you a good bit of success, like Lightning Jack, for example, but the animals do not
respond to that sound near as much as they did before, FOXPITCH allows you to manipulate
that sound to help make it fresh again.
FOXPITCH has numerous levels of operation. The normal state of a sound is when FOXPITCH is
set to off. When increasing the pitch, the value will rise from 1 through 9. Lowering goes from -1
through -9. As you adjust the pitch value, the effect will take place immediately. Note that if you
change the primary sound, FOXPITCH will automatically be deactivated.
Activating FOXPITCH:
1.
Access the FOX FEATURES menu on the X2S remote and locate FOXPITCH.
2.
Select FOXPITCH and use the scroll buttons to change the value from “Off” to the
desired level.
3.
When the pitch adjustment is set, push the “Play/Select” button to lock it in.
5-5
AUTO VOLUME
Different hunters like to deploy different tactics in the field. For example, some may get setup
and start playing their favorite sound at a specific volume level until an animal shows up.
Others prefer to have their volume level change frequently. While both methods have been
proven successful, Auto Volume takes care of your volume manipulation so that you can keep
focusing on the action in the field. When activated, auto volume begins playing your sound at
the lowest volume setting. Over the course of a few minutes, your volume level will slowly
begin to rise. Once it reaches a certain point, the volume will then begin to modulate up and
down automatically.
Activating AUTO VOLUME:
1.
Access the FOX FEATURES menu on the X2S remote and locate AUTO VOLUME.
2.
Change the value from off to on.
3.
After changing to on, push “Play/Select” to lock it in.
When you are operating with Auto Volume engaged, you can still adjust the volume, but the
adjustment that you make is relative only to the maximum volume that Auto Volume will climb
to during its operational cycle. If you change sounds while AUTO VOLUME is turned on, it will be
automatically turned off.
5-6
User Button
The User button is located on the bottom left side of your X2S remote keypad. This button can
be assigned a function of your choice for quick one button access. You can choose from preset
5, theme change, FOXBANG, FOXMOTION, Auto Volume, time(r) toggle, timer reset, or
backlight.
Содержание X2S Series
Страница 1: ......
Страница 59: ...59 Notes...
