Foxpro X2S Series, Инструкция по эксплуатации

Страница: 58 / 60

58
can detune the antenna causing a decrease in operating performance.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
Note: Units exported beyond the boundaries of North America are not FCC certified. FOXPRO
Inc. makes every attempt at complying with regional regulations governing radio spectrum.
However, it is the user’s responsibility to ensure compliance with local laws and ordinances that
govern the use of radio controlled devices in the area of operation.
Industry Canada Notice
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesirable operation of
the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicable aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouilage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le functionnement.