FOXPOWER FULAGDA1512A, Руководство пользователя

Страница: 18 / 59

Remote Control
Apart from the switch panel on the front (or top) side of the inverter, an
extra LCD remote switch panel (Figure 7) connected to the remote port at
the DC side of the inverter through a standard Ethernet cable can also
control the operation of the inverter.
If an extra switch panel is connected to the inverter via "remote control
port", together with the panel on the inverter case, the two panels will be
connected and operated in parallel.
Whichever first switches from "Off" to "Power saver off" or "Power saver on",
it will power the inverter on.
If the commands from the two panels conflict, the inverter will operate
according to the following priority: Power saver on> Power saver off>
Power off
Only when both panels are turned to the "Unit Off" position, will the
inverter be powered off.
The Max length of the LCD remote control data cable is 60 feet (18 meters).
The LCD remote control panel will display the operation status of the
inverter, including:
• Input AC Voltage
• Output AC Voltage
• Battery Voltage
• Output Frequency
• Output Load
• Work Mode
• Alarm
• Fault
• Battery Capacity
Figure 6
Figure 7
Figure 8