FOXPOWER FULAGDA1512A, Руководство пользователя

Страница: 16 / 59

Inverter
Condition
Battery Temperature Sensor
Applying the proper charge voltage is critical for achieving optimum
battery performance and longevity. The ideal charge voltage required by
batteries changes with battery temperature.
The battery temperature sensor allows the charge controller to
continuously adjust charge voltage based on actual battery temperature.
Temperature compensation of charge voltage assures that the battery
receives the proper charge voltage as battery temperature varies.
The entire line is equipped with Battery Temperature Sensing for increased
charging precision.
It sends precise information to the charger, which automatically adjusts
voltage to help ensure full battery charge depending on the ambient
temperature of your battery installation.
When the battery voltage is over 40°C(104°F), it will reduce the charging
voltage by 0.1Vdc with every degree of temperature rise.
We recommend that you install Battery Temperature Sensors on all banks
to protect your batteries and to provide optimal charging of each bank.
The battery temperature sensor mounts on the side of a battery or any
other location where the precise temperature of battery can be detected
such as battery mounting racks.
The following table describes approximately how much the voltage may
vary depending on the temperature of the batteries. IMPORTANT: If the battery temperature is allowed to fall to extremely
cold temperatures, the inverter with a BTS may not be able to properly
recharge cold batteries due to maximum voltage limits of the inverter.
Ensure the batteries are protected from extreme temperatures.
For more detailed technical information, please contact us.
A Battery Temperature Sensor (Part
#:ULTRAFEBTS) has been provided
as a separate accessory. It comes
with 32.8'/10m cable.
Temperature on BTS Charger Operation
Charger
Mode
BTS≥50°C (122ºF)
Automatically turns off charger
BTS≤40°C (104ºF)
Automatically turns on charger
Inverter
Mode
40°C (104ºF)≤BTS≤40°C (104ºF)
Increases low voltage shut down
point by 0.5Vdc
BTS≥50°C (122ºF)
Over Temp Fault