19
Chapter 2 Installation Instructions
Step 2. Connect the 3-pin connector (A) of the TV out cable to TV out connector (As
figure 2).
Step 3. Plug the display cable into your S-video port of the TV out cable (B).
Then you can use this function.
Note:
1. When VGA port and TV out port are both connected to display devices,
the system will define VGA port as default setting. If you want to change
the display priority, please go to
Display properties --> Setting --> Ad-
vanced --> C51 --> nView display setting
to select the desired display
device.
2. When you use TV as display device, please make sure your resolution
has been set as 800 x 600 60Hz or 640 x 480 60Hz.
3. Windows XP or Windows 2000 is strongly recommended.
Figure 2
文件使用
"pdfFactory"
试用版本创建
³
³
www.fineprint.com.cn
