Foxconn NF4UK8AA series Скачать руководство пользователя страница 46

Страница: 46 / 105

Chapter 3 BIOS Description

USB Asyn Data Reads (Default: non-ISO Queue)

This item is used to set the USB Asyn Data Reads.

AC97 Audio (Default: Auto)

This item is used to set whether onboard AC97 audio is enabled. Dis-

abled the controller if you want to use other controller cards to connect an

audio device.

MC97 Modem (Default: Auto)

This item is used to set whether onboard MC97 modem is enabled.

MAC Lan (Default: Auto)

Setting to Auto allows the BIOS to auto-detect the NVIDIA LAN controller and

enable it.

Onboard 1394 Controller (Default: Enabled)

This item allows you to enable or disable the onboard IEEE 1394 controller.

IDE HDD Block Mode (Default: Enabled)

This item is used to set whether the IDE HDD Block Mode is allowed.

POWER ON Function (Default: BUTTON ONLY)

This item is used to set the power on method for your PC.

KB Power ON Password

When the POWER ON Function is set to Keyboard, use this item to set the

password.

Hot Key Power ON (Default: Ctrl-F1)

When the POWER ON Function is set to Hot KEY, use this item to set the

hot key combination that turns on the system.

Onboard FDC Controller (Default: Enabled)

This item is used to set whether the onboard FDC controller is enabled.

Onboard Serial Port 1 (Default: 3F8/IRQ4)

This item is used to assign the I/O address and interrupt request (IRQ) for
the onboard serial port 1. This item cannot be adjusted.

Onboard Serial Port 2 (Default: 2F8/IRQ3)

This item is used to assign the I/O address and interrupt request (IRQ) for
the onboard serial port 2. This item cannot be adjusted.

Содержание NF4UK8AA series










































































































Результаты поиска

Содержание NF4UK8AA series

Отзывы:

Похожие инструкции для NF4UK8AA series

Бренды по названию

Популярные бренды

Foxconn NF4UK8AA series, Руководство пользователя

Результаты поиска

Содержание NF4UK8AA series

Отзывы:

Похожие инструкции для NF4UK8AA series

Бренды по названию

Популярные бренды