Foxconn NF4UK8AA series Скачать руководство пользователя страница 23

Страница: 23 / 105

Chapter 2 Installation Instructions

Rear, Line in/side, Line out, Microphone, CEN/LFE

When using a 2-channel sound source, the Line out jack is used to connect to

speaker or headphone; the Line in jack connects to an external CD player,

tape player or other audio device. The Microphone jack is used to connect to

the microphone.

When using a 6-channel sound source, connect the front speaker to the green

audio output; connect the surround sound speaker to the black audio output;

connect the center speaker/subwoofer to the yellow audio output.

When using a 8-channel sound source, connect the front speaker to the green

audio output; connect the rear sound speaker to the black audio output; con-

nect the center speaker/subwoofer to the yellow audio output; connect the side

sound speaker to the blue audio output.

This motherboard includes connectors for FDD devices, IDE HDD devices,

SATA devices, USB devices, 1394 devices, IR module, CPU fan, system fan, and

others.

FLOPPY

This motherboard includes a standard FLOPPY interface, supporting 360 K, 720 K,

1.2 M, 1.44 M, and 2.88 M FDDs.

HDD Connectors: PIDE & SIDE

These connectors support the provided UltraDMA133/100/66 IDE hard disk rib-

bon cable and you can configure as a disk array through NVIDIA nForce4 Ultra

IDE RAID controller. Refer to chapter 5 for details on how to set up RAID

configurations.

Connect the cable’s blue connector to the primary (recommended) or second-

ary IDE connector, then connect the gray connector to the slave device (hard

disk drive) and the black connector to the master device. If you install two hard

disks, you must configure the second drive as a slave device by setting its

jumper accordingly. Refer to the hard disk documentation for the jumper settings.

Other Connectors

Содержание NF4UK8AA series










































































































Результаты поиска

Содержание NF4UK8AA series

Отзывы:

Похожие инструкции для NF4UK8AA series

Бренды по названию

Популярные бренды

Foxconn NF4UK8AA series, Руководство пользователя

Результаты поиска

Содержание NF4UK8AA series

Отзывы:

Похожие инструкции для NF4UK8AA series

Бренды по названию

Популярные бренды