background image

5

86

7. There are two drivers, for your 32-bit XP system, press [Enter] to select the first 

driver - "AMD AHCI Compatible RAID Controller-x86 platform".

8. A confirmation message appears to double check if the driver is really what we 

wanted, press <Enter> to continue. 

Windows Setup

 

  Setup will load support for the following mass storage device(s):

        AMD AHCI Compatible RAID Controller-x86 platform

      * To specify additional SCSI adapters, CD-ROM drivers, or special 

        disk controllers for use with Windows, including those for 

        which you have a device support disk from a mass storage device 

        manufacturer, press S.

      * If you do not have any device support disks from a mass storage

        device manufacturer, or do not want to specify additional

        mass storage devices for use with Windows, press ENTER.

  S=Specify Additional Device         ENTER=Continue        F3=Exit

Windows Setup

 

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

      

   ATI AHCI Compatible RAID Controller-x86 platform

   AMD AHCI Compatible RAID Controller-x64 platform

AMD AHCI Compatible RAID Controller-x86 platform

  ENTER=Select     F3=Exit

Содержание A78AX 3.0 Series





































































































Отзывы: