3
20
System Information
This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
►
Date (mm:dd:yy)
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Time (hh:mm:ss)
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► IDE Master / Slave
While entering setup, BIOS automatically detects the presence of IDE devices.
► SATA1# / SATA2# / SATA3# / SATA4# / SATA5# / E-SATA#
When OnChip SATA Type is set to [Native IDE], while entering setup, BIOS automatically
detects the presence of SATA devices.
SATA1# is the lower SATA port of SATA1_SATA2 of the motherboard.
SATA2# is the upper SATA port of SATA1_SATA2.
SATA3# is the lower SATA port of SATA3_SATA4.
SATA4# is the upper SATA port of SATA3_SATA4.
SATA5# is the lower SATA port of SATA5_ESATA.
E-SATA# is the upper SATA port of SATA5_ESATA.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
System Information
Date (mm:dd:yy)
[Wed , 01/16/2008]
Help Item
Time (hh:mm:ss)
[11 : 59 : 49]
► IDE Master
[Not Detected]
Use [Enter], [TAB]
► IDE Slave
[Not Detected]
or [SHIFT-TAB] to
► SATA1#
[Not Detected]
select a field.
► SATA2#
[Not Detected]
► SATA3#
[Not Detected]
Use [+] or [-] to
► SATA4#
[Not Detected]
change system date.
► SATA5#
[Not Detected]
► E-SATA#
[Not Detected]
Halt On
[All Errors, But ...]
Keyboard
[Disabled]
Mouse
[Disabled]
Model Name
: A78AX 30
BIOS ID
: 9A4F1D09
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
01
