manualshive.com logo in svg

Foxconn A78AX 3.0 Series, Руководство пользователя, Страница: 37 / 100

Поделиться
Скачать
Foxconn A78AX 3.0 Series Скачать руководство пользователя страница 37

3

30

This item allows you to select a delay time (in clock cycles) between sending the last data from 
a write operation to the memory and issuing a read command.

► tRWTTO (Read-to-Write Turnaround for Data, DQS Contention)

This timing parameter ensures read-to-write data-bus turnaround. 

► tWRRD (Write to Read DIMM Termination Turn-around)

This timing parameter accounts for termination timing when a write is followed by a read to a
different DIMM. DIMM.

► tWRWR (Write to Write Timing)

This timing parameter accounts for turn-around timing when a write is followed by a write to a
different DIMM.

► tRDRD (Read to Read Timing)

This timing parameter accounts for turn-around and termination timing when a read is followed
by a read to a different chip select.

► tRFC0, 1 (Auto-Refresh-to-Active/Auto-Refresh Command Period)

Refresh to Refresh or Refresh to Active command interval.
tRFC1: auto-refresh row cycle time for logical DIMM 1.
tRFC0: auto-refresh row cycle time for logical DIMM 0.

Integrated Peripherals

► IDE Configuration / USB Configuration / SuperIO Configuration 

Press <Enter> to go to relative submenu.

► OnBoard LAN

This item is used to enable or disable the onboard LAN controller.

► OnBoard LAN Boot ROM

This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.

► HD Audio Controller

This item is used to enable or disable the HD Audio Controller.

          CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.

                                                   Integrated Peripherals

   ► IDE Configuration 

[Press Enter]

 

   

Help Item

  ► USB Configuration 

[Press Enter]

 

   ► SuperIO Configuration 

[Press Enter]

 

Configure the IDE 

   OnBoard LAN 

[Enabled] 

device(s).

   OnBoard LAN Boot ROM 

[Disabled]

  HD Audio Controller 

[Enabled]

 

   

   

  

   ↑↓←→:Move   Enter:Select     +/-/:Value     F10:Save      ESC:Exit     F1:General Help         

     

                                         F9:Optimized  Defaults

[Press Enter]

Содержание A78AX 3.0 Series





































































































Отзывы:

Нет отзывов