Foxconn 755FXK8AA series Скачать руководство пользователя страница 44

Страница: 44 / 87

Chapter 3 BIOS Description

SIS USB Controller (Default: Enabled)

This option is used to enable or disable SIS USB controller.

USB 2.0 Supports (Default: Enabled)

This option is used to enable or disable USB 2.0.

USB Keyboard Support (Default: Enabled)

This option is used to set USB keyboard support. The available setting values
are: Disabled and Enabled.

USB Mouse Support (Default: Enabled)

This option is used to set USB mouse support. The available setting values
are: Disabled and Enabled.

SIS AC97 AUDIO (Default: Enabled)

This option is used to enable or disable SIS AC97 audio.

SIS S/W Modem (Default: Enabled)

This option is used to enable or disable CNR modem.

SIS Serial ATA Controller (Default: Enabled)

This option is used to enable or disable SIS serial ATA controller. The

available setting values are: Disabled and Enabled.

SIS Serial ATA Mode (Default: IDE)

This option is used to set Serial ATA mode. The default is recommended.

The available setting values are: IDE and RAID.

SIS OnChip PCI Device Menu

Ｋ８Ｓ７５５ＦＸＡ－ｍａｎｕａｌ－Ｖ１．１．ｐ６５

2005-2-3, 14:33

Содержание 755FXK8AA series
























































































Результаты поиска

Содержание 755FXK8AA series

Отзывы:

Foxconn 755FXK8AA series, Руководство пользователя, Страница: 44 / 87

Результаты поиска

Содержание 755FXK8AA series

Отзывы: