Foxconn 755FXK8AA series Скачать руководство пользователя страница 42

Страница: 42 / 87

Chapter 3 BIOS Description

Integrated Peripherals

Integrated Peripherals Menu

SIS OnChip IDE Device

Press <Enter> to set onchip IDE device. Please refer to page 35.

SIS OnChip PCI Device

Press <Enter> to set onchip PCI device. Please refer to page 36.

Onboard SuperIO Device

Press <Enter> to set onchip onboard SuperIO device. Please refer to page

37.

IDE HDD Block Mode (Default: Enabled)

This option is used to set whether the IDE HDD Block Mode is allowed. The

available setting values are: Disabled and Enabled.

Init Display First (Default: PCI Slot)

This option is used to set which display device will be used first when your

PC starts up. The available setting values are: PCI Slot and AGP.

USB0/1/2/2.0 Access Interface (Default: EDB Bus)

This option is used to set USB0/1/2/2.0 Access Interface. The available

setting values are: PCI Bus and EDB Bus.

Audio Access Interface (Default: EDB Bus)

This option is used to set audio access Interface. The available setting

values are: PCI Bus and EDB Bus.

Ｋ８Ｓ７５５ＦＸＡ－ｍａｎｕａｌ－Ｖ１．１．ｐ６５

2005-2-3, 14:33

Содержание 755FXK8AA series
























































































Результаты поиска

Содержание 755FXK8AA series

Отзывы:

Foxconn 755FXK8AA series, Руководство пользователя, Страница: 42 / 87

Результаты поиска

Содержание 755FXK8AA series

Отзывы: