manualshive.com logo in svg

Foxcom Sat Light 7310, Инструкция по установке и эксплуатации

Поделиться
Скачать
Foxcom Sat Light 7310 Скачать руководство пользователя страница 8

7310 Installation and User’s Guide

 

Front Chapter 

Foxcom, transportation prepaid.  Devices returned collect or 
without authorization may not be accepted.

 

2.

 

Prior to repair, Foxcom will advise the customer of our test 
results and any charges for repairing customer-caused 
problems or out-of-warranty conditions etc.

 

3.

 

Repaired products are warranted for the balance of the original 
warranty period, or at least 90 days from date of shipment.

 

D)

 

 Limitations of Liabilities 

Foxcom's liability on any claim, of any kind, including negligence for 
any loss or damage arising from, connected with, or resulting from the 
purchase order, contract, quotation, or from the performance or breach 
thereof, or from the design, manufacture, sale, delivery, installation, 
inspection, operation or use of any equipment covered by or furnished 
under this contact, shall in no case exceed the purchase price of the 
device which gives rise to the claim. 

EXCEPT AS EXPRESSLY PROVIDED HEREIN, FOXCOM 
NETWORKS MAKES NO WARRANTY, EXPRESSED OR 
IMPLIED, WITH RESPECT TO ANY GOODS, PARTS AND 
SERVICES PROVIDED IN CONNECTION WITH THIS 
AGREEMENT INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE.  FOXCOM 
NETWORKS SHALL NOT BE LIABLE FOR ANY OTHER 
DAMAGE INCLUDING, BUT NOT LIMITED TO, INDIRECT, 
SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT 
OF OR IN CONNECTION WITH FURNISHING OF GOODS, 
PARTS AND SERVICE HEREUNDER, OR THE 
PERFORMANCE, USE OF, OR INABILITY TO USE THE 
GOODS, PARTS AND SERVICE. 

The Company's exclusive warranty and the remedy provided for 
breach thereof shall not apply to (a) any Product used or operated other 
than pursuant to the Company's written instructions, (b) damage or 
deficiencies resulting from accident, alteration, modification, misuse, 
tampering, negligence, improper maintenance, installation or abuse, (c) 
use of any Product other than at the Installation Site, (d) use of any 
Product that is defective or damaged due to misuse, accident, or 
neglect, or due to external electrical stress, lightning or other acts of 
nature, (e) use of any Product by a person who is not any authorized 
employee of the Customer, or (f) used other than as explicitly 
authorized in writing by the Company.   

 

Foxcom Proprietary Information      

9 

Document No. 93-005-39-A1 

Содержание Sat Light 7310












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды