ENGLISH
www.foxint.com
Features
Sealing O-Ring
Sealing O-Ring
Operation Button:
On/Off
LED Colour
Registration
Illuminating Top Cap
Multi Coloured LED
• Weatherproof Sealed Unit
• Easy Registration
• Very Low Battery Drain
• I-Com® Technology
• Digital Circuitry
• Multi Coloured LED
CAPSULE INSTRUCTION MANUAL
Battery Cap
Operation
Capsule On/Off:
• A held press of the on/off button for 2 second will turn the Capsule On/Off – LED will illuminate when first turned ON.
(In the first colour in the sequence if a colour has not been previously selected).
Please Note:
The LED will always illuminate and stay on when you first turn the Capsule ON (”operational mode”).
If you want to turn the LED off, it has to be done with either the Remote (”standby mode”) or with a single press of the on/off button (”standby mode”), or by turning the capsule OFF again.
This is intentional so the Capsule can be usable with or without the use of a Remote.
LED On/Off:
• Once the Capsule is ON, a single press of the on/off button will turn the LED On/Off.
(In the first colour in the sequence if a colour has not been previously selected).
LED Colour Selection:
• Once the Capsule is ON, a held press of the on/off button for 4 seconds will send the Capsule into the “colour selection mode”.
(LED will turn off after two seconds and on again on after four seconds).
• The LED will quickly cycle through all colour options, then stay on
(always starting at the first colour option in the sequence).
• The colour options
(6)
are then cycled through with a single press of the on/off button – One press moves to the next colour option.
• Once the preferred colour is visible, this is selected and programmed to the Capsule by a held press of the on/off button for 2 seconds.
After selection, the Capsule LED will quickly go off and on again, indicating the colour has been selected and programmed.
• The Capsule returns to the ON state
(LED illuminating in the selected colour).
Please Note:
If there is no button press for over 40 seconds whilst in the ‘Colour Selection Mode’, the Capsule will automatically exit the ‘Colour Selection Mode’, programming the colour visible at that time.
Registration with Remote:
• Once the Capsule is ON, a held press of the on/off button for 6 seconds will send the Capsule into the “registration mode”
(LED will turn off after two seconds and on again on after four seconds).
• The LED will quickly cycle through all colour options, then flash the selected LED colour, indicating it is in the “registration mode”
(if a colour has not been selected,
it will always flash the first colour option in the sequence).
• The preferred button on the remote is pressed, registering the Capsule to that button on the Remote.
• The LED on the Capsule stops flashing, and remains on and fixed
(in the selected colour, or the first colour option in the sequence if a colour has not been selected).
6 Sec
4 Sec
2 Sec
3/8” BSF Thread
Thread for Sealed Attachment
M A R K E R P O L E S
I L L U M I N A T E D
