Fox F28-186, Руководство пользователя

Страница: 34 / 51

34
If the supply cable is damaged it must be changed by qualified people. Do not switch on the machine if the supply
cable is damaged.
This tool is provided with a plug which must connected to a suitable socket.
EXTENSION CABLES
Only use three conductors extension cables, with a plug with two plugs and a earthing contact and sockets with
two holes and a earth corresponding to the plug of the tool. When using an electric tool at a remarkable distance
from the power supply, use an extension cable with sufficient dimensions to transport the current which the tool
needs. If the extension cable has not the sufficient dimensions a voltage drop can occur, thus causing an
overheating and a voltage loss. You can only use extension cables which are in compliance with CE standards.
Extension cable length : up to 15 m
Cable dimensions: 3 x 2,5 mm²
Before using any kind of extension cable, check that it has not bare wires and that the insulation is not cut or
worn. Repair and change immediately it if it is damaged or worn.
WARNING:
Extension cables must be arranged away from the working area in order that they do not get in touch with the
workpieces, the tool or other parts of the machine, thus creating possible risks.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN
This bandsaw has been manufactured for cross cutting and trimming of metal materials (not hard or tempered
metal), non-ferrous metal, plastics, wood.
Maximum cutting height is 150 mm with the workbench at 0°.
The workbench can be inclined up to 45° to angle cut.
RECOMMENDED USE