Fox F28-186, Руководство пользователя

Страница: 35 / 51

35
Engine
power: 370 W
Voltage and frequency: 230 V – 50 Hz
Blade rotational speed: 730 m/min
Blade’s length: 1820
Blade’s width: 3-12 mm
Gooseneck: 245 mm
Maximum cutting height: 150 mm
Workbench inclination capacity: from 0° to 45°
Workbench dimensions: 340 x 335 mm
Net weight: 45 kg
Gross weight: 48 kg
The noise emitted, measured in conformity with the standards EN 3744 and EN 11201 is:
- Sound pressure level
L
pA = 68,7 dB(A) without load and 84,5 dB(A) with load
- Sound power level
L
WA = 81,7 dB(A) without load and 97,5 dB(A) with load
- Uncertainty of measurement K = 3 dB
We recommend you to use ear protection devices.
The sources of the noise of the saw are: the electric engine and its ventilation system, the blade and the material to
be cut.
We advise you to control the engine, its ventilation system and the aspiration passages. As far as the saw blade is
concerned, it is preferable to use silenced type of blades and to keep them in good conditions. We recommend to
use the correct saw blade and to keep firmly the workpiece to be cut.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if there is a
connection between emission levels and exposure levels, the first ones cannot be used to determine safely if other
precautions are necessary. The factors that can influence the actual exposure level of the operator include
exposure length, environment features and other sources of noise, as for example the number of machines and
operations present. Besides, exposure levels can change from country to country. However, these instructions
enable the user of the machine to better evaluate the dangers and risks.
Your bandsaw is delivered complete in a package. Remove carefully the bandsaw and all the parts from the
packaging, check if there are any missing or damaged parts.
If you find any faulty or damaged parts do not use them in order not to endanger the efficiency and the safety of the
machine. To change faulty parts consult an after sales centre.
In order the bandsaw perfectly works you must assemble the various parts, for which you can find a detailed
explanation later on.
We recommend you to read the assembly instructions carefully and to follow them to the letter.
Remove the protective coating of the worked surfaces with a cloth and a cleansing, as for example WD40; do not
use acetone, petrol or varnish thinners.
TECHNICAL SPECIFICATIONS
NOISE CONDITIONS
REMOVAL OF PACKAGE