Introduction
Suction filter
Base of foot
Warning: Ensure the suction foot filter is clean
and in good condition.
14
Press in hose
Remove the dust / water seal
(please keep it in a safe place)
Hose Connection
Hose Disconnection
①
②
Replace the dust / water
seal when not in use
b.While pressing the lever,
carefully pull the hose loose
a.Press the lever to release
the locking interface
①
②
Installation of your Fovno rack
The system allows for the angle of the fork clamp to be adjusted,
The system is suitable for all lengths of handlebar,
Please prevent handlebars for making contact when in use,
Test fit the system before tightening bolts to ensure the set-up is accurate,
Ensure all boils are fully tightened and secure before use.
Loosen both M6 bolts beneath
the clamp.
Loosen the M6 bolt on the top
of the clamp.
Adjust the angle.