Four winns Horizon 210, Руководство пользователя

Страница: 60 / 159

Page 12
Section E
Horizon & Sundowner
Owner’s Manual
06/00
6. Seawater Temperature
This function measures the water temperature at the
paddle wheel speedo. When the Depth function is in
”Feet” the function defaults to “ 0 F” (Fahrenheit). When
the Depth function is in “Meters” the temperature de-
faults to “ 0 C” (Centigrade). See VDO “Quick Start”
card at the end of this section for additional directions.
If you have any questions or need assistance please
contact VDO North America LLC at (540) 665-0100 or
Four Winns® Customer Service at 231-775-1343.
J. Ignition Switch
The ignition switch, for the Horizons and Sundowners,
has four positions: OFF, RUN, ACCESSORIES, and
START. The START position is spring loaded and the
key should be held in this position until the engine starts.
The key will return to the RUN position once released.
Always turn the key to the OFF position when the engine
is not running. This will prevent discharging of the
battery(s). The ACCESSORIES position allows the
operator to run the stereo without activating the other
ship’s systems. Additional information on ignition switch
operation is covered in Section A Operation, of this
manual.
K. Emergency Stop Switch
This safety device automatically stops the engine if the
lanyard is attached to the operator and the operator
falls from his work station. Refer to the engine manual
for detailed information about using this switch.
The emergency stop switch (Figure E19) incorporates
a shutoff switch, switch clip, lanyard, and lanyard
clip.The lanyard clip must be securely attached to the
operator’s PFD, clothing, arm, or leg. Be sure to attach
the lanyard to a place where it is free of obstructions
and to something that will move with the operator if he
or she leaves the helm station. If the engine shuts down
because this switch was activated, the clip may have
to be reinstalled on the interrupter switch before the
engine can be started.
Keep emergency stop switch lanyard free from
obstructions that could interfere with its opera-
tion. Do not modify or remove emergency stop
switch or bypass its safety features. The proper
use of the emergency stop switch will prevent
a runaway boat situation which can cause se-
vere personal injury or death.
Figure E19: Emergency Stop Switch
The emergency stop switch can only be effective when
in good working condition. Observe the following:
1. Lanyard must always be free of entanglements that
could hinder its operation.
2. Once a month, check the switch for proper opera-
tion. With engine running, pull lanyard. If the en-
gine does not stop, see your Four Winns® dealer.
3. Once a month, inspect both the clip and lanyard for
cuts, breaks or wear. Replace worn or damaged
parts.
In an emergency situation, any occupant of the boat can
restart the engine. Just press in and hold the emer-
gency stop switch button, then follow normal starting pro-
cedures. When the button is released, the engine will
stop.
Avoid knocking or pulling the clip or lanyard from
the switch during regular boating operation.
Occupants may be thrown forward or possible
engine damage may occur by the sudden loss
of engine power.