Four-Faith F8 14 Series, Руководство пользователя

Страница: 22 / 49

F8X14 Series User Manual
◆
Trigger Type
Normally, IP MODEM always keeps online and always be ready for data transmission. But in
some circumstances, it’s important to reduce wireless data flow. To realize this function, the
software can makes IP MODEM into sleep state in idle time. When there is application data to
transmit, IP MODEM can be triggered online ready for data transmission. There are total five
methods to make IP MODEM online:
AUTO: IP MODEM always keeps online
SMSD: send a special short message to make IP MODEM online
CTRL: make IP MODEM online through a phone call to IP MODEM
DATA: send special serial data to make IP MODEM online
MIXD: the combination of SMSD, CTRL, DATA. IP MODEM will be online when meet one of
these three trigger methods.
AT Command:
AT+ACTI=xxxx
xxxx: one of the above trigger methods
◆
Disconnect to Trigger Mode
If the Trigger Type is not AUTO and the Disconnect to Trigger Mode is enable, the modem will
go to trigger mode when the modem disconnect to the server.
AT Command:
AT+ISTRIGMODE=x
x = 0/1 0: Disable disconnect to Trigger Mode
1: Enable disconnect to Trigger Mode
◆
Debug Level
Debug information is used to debug software when there is software problem.
0 --- no debug information output
1 --- simple prompt information output
2 --- detail debug information output
AT Command:
AT+DEBUG=x
x : the debug level value
Attention: Only there is some problem to the IP MODEM, It’s necessary to set this value