Four-Faith F8 14 Series, Руководство пользователя

Страница: 13 / 49

F8X14 Series User Manual
58.5
35
28
28
22
8
25
Ф3
Ф5
4
Figure 2-1 Installation Chart
Installation of SIM/UIM card:
Firstly power off the IP MODEM, and press the out button of the SIM/UIM card outlet with a
needle object. Then the SIM/UIM card sheath will flick out at once. Put SIM/UIM card into the
card sheath (Pay attention to put the side which has metal point outside), and insert card sheath
back to the SIM/UIM card outlet.
Warning:
Forbid to install SIM/UIM card when powered!
Installation of antenna:
Screw the SMA male pin of the antenna to the female SMA outlet of the IP MODEM tightly.
Warning: The antenna must be screwed tightly, or the signal quality of antenna will be influenced!
User Interface Signal Definition
Pin Number Signal Name Default Function Extensible Function
1 PWR Power input anode N/A
2 GND Power Ground N/A
3 GND Power Ground N/A
4 RX RS232 RX N/A
5 TX RS232 TX N/A
6 A RS485 anode Reserved compatible DTR
7 B RS485 cathode Reserved compatible DSR
8 IO1 GPIO Reserved compatible RTS and
RS232 RX (TTL logic level)
9 IO2 GPIO Reserved compatible CTS and
RS232 TX (TTL logic level)
10 IO3 GPIO Reserved compatible DCD
11 IO4 GPIO Reserved compatible RI,ADC,
and pulse output