Four-Faith F8 14 Series, Руководство пользователя

Страница: 32 / 49

F8X14 Series User Manual
AT mode, configuration and sending data by AT command.
AT Command:
AT+ZTXTYPE=n
n=0/1/2. 0: Trans
1: API
（
Data format see appendix a
）
2: AT
◆
Physical Channel Setting
AT Command:
AT+ZCHANNEL=n
n = 11~26
◆
Trans Type Setting
There are six directions for data transferring as follows,
(1)Zigbgee to COM, data from Zigbgee module will transfer to serial port
(2)COM to Zigbee, data from serial port will transfer to Zigbee module
(3)GPRS to COM, data from remote center will transfer to serial port
(4)COM to GPRS, data from serial port will transfer to remote center
(5)Zigbee to GPRS, data from Zigbgee module will transfer to remote center
(6)GPRS to Zigbee, data from remote center will transfer to Zigbee module
AT Command:
AT+ZDATCHAN=dir
Tab3.1 zigbee transfer direction
dir description
0 NONE
1 Zigbee->COM
2 COM->Zigbee
4 GPRS->COM
8 COM->GPRS
16 Zigbee->GPRS
32 GPRS->Zigbee
255 ALL
dir default value is 255