F-DPU100 Distributed Processing Unit User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 22 of 86
Add: 11th Floor,A-06 Area,No.370,Chengyi Street,Jimei,Xiamen,Fujian,China. 361021
Web: en.four-faith.com
Tel: +86-592-5907276 / 5907277
Fax: +86-592-5912735
Dial String:
dial number of users' ISP
APN:
access point name of users' ISP
PIN:
PIN code of users' SIM card
Connection type
Connection type:
Auto, Force 3G, Force 2G, Prefer 3G, Prefer 2G options. If using 4G module,
there has 4G network option. Users select different mode depending on their need
DHCP-4G
IP address of WAN port gets automatic via DHCP-4G
Keep Online
This function is used to detect whether the Internet connection is active, if users set it and when
the F-DPU100 detect the connection is inactive, it will redial to users' ISP immediately to make
the connection active. If the network is busy or the user is in
private network
, we recommend that
F-DPU100 mode will be better.
Detection Method:
None:
do not set this function
Ping:
Send ping packet to detect the connection, when choose this method, users should also
configure "Detection Interval", "Primary Detection Server IP" and "Backup Detection
Server IP" items.
Route:
Detect connection with route method, when choose this method, users should also
configure "Detection Interval", "Primary Detection Server IP" and "Backup Detection
Server IP" items.
PPP:
Detect connection with PPP method, when choose this method, users should also
configure "Detection Interval" item.
Detection Interval:
time interval between two detections, unit is second
Primary Detection Server IP:
the server used to response the F-DPU100’s detection packet. This
item is only valid for method "Ping" and "Route".
Backup Detection Server IP:
the server used to response the F-DPU100’s detection packet. This
item is valid for method "Ping" and "Route".
Note:
When users choose the “Route” or “Ping” method, it’s quite important to make sure
